Description:
*6 ports Gigabit Ethernet switch has four 10/100/1,000M UTP ports and two 1,000M SFP sockets
*Customer can choose different 1,000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX and more
*The product is possessed of stable performance with adopting latest IC from USA
*It is applicable to used in constructing of optical fiber Ethernet
Specifications:
*2 x 1,000M SFP + 4 x 10/100/1000M RJ45 ports
*UTP: RJ45, 10/100/1,000Mbps
*SFP slot: 1,000Mbps
*MM: 850/1,310nm
*SM: 1,310/1,550nm
Features:
*6-port 10/100/1,000Mbps GB Ethernet switch
*Four 10/100/1,000M UTP ports and two 1,000M SFP ports
*Auto negotiation function supports UTP ports to auto 10/100/1,000M and full duplex/half duplex
*Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
*The SFP slot supports 1,000M and full duplex mode
*Supports IEEE 802.3x flow control and broadcast storm protection
*Supports VLAN and QoS
*Supports maximum 10KB frame
*It is low-power consume (4W), low-heat, and good reliability
Technical parameters:
*Operating standards: IEEE802.3/u/z/ab, 10/100/1000Base-T and 1000Base-SX/LX
*Apples' Mac address table: 1K
*Frame buffer memory: 1MKB
*Switching capacity: 12GB
*Connector:
*UTP:
*RJ45: 10/100/1,000Mbps
*SFP slot: 1,000Mbps
*Cable: UTP: Cat5 or 6 UTP (the maximum distance up to 100m)
*Multi-mode fiber: 50/125, 62.5/125μm (the maximum distance up to 224/550m)
*Single mode fiber: 8/125, 8.7/125, 9/125μm (the maximum distance up to 10 to 100km)
Flow control:
*Full duplex: IEEE802.3x
*Half duplex: back pressure
*LED: PWR, F1 Link/Act, F2 Link/Act, TP1 to TP4 Link/Act, TP1 to TP4 100, TP1 to TP4 1000
*Power requirement: 220V AC (100 to 240V), 50 to 60Hz, 5V DC, 2A
*Ambient temperatures: 0 to 50°C
*Storage temperatures: -20 to 70°C
*Humidity range: 5 to 90% RH
*Dimensions (H x W x L): 30 x 140 x 100mm