English 
Description
SC Fiber Optic Fast Connector designed for FTTH is a new generation of fiber connector used in assembly. It can provide Open flow and Pre-cast type of products, whose optical and mechanical specification meets the standard optical fiber connector.
It is designed for high quality and high efficiency for installation the structure of crimping position is a unique design, and need not gluing, polishing neither any consumables. Adopting fiber pre-installed structure, and convenient for field installation.
Technical specification
Item | Parameter |
Cable Scope | 3.0 x 2.0 mm Bow-type Drop Cable |
Fiber Diameter | 125μm ( 652 & 657 ) |
Coating Diameter | 250μm |
Mode | SM |
Operation Time | about 15s(exclude fiber presetting) |
Insertion Loss | ≤ 0.25dB(1310nm & 1550nm) |
Return Loss | ≤ -45dB |
Success Rate | >98% |
Reusable Times | >10 times |
Tensile Strength | >5 N |
Tighten Strength of Coating | >10 N |
Temperature | -40~+85°C |
On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
Mechanical Durability(500 times) | IL ≤ 0.3dB |
Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
Field assembly procedure :
