Fiber Optic Hand Tool Bag
FTTH Tool is a multifunctional tool kit which provides the tools necessary for the assembly of Mechanical Splices.
It will bring you a higher working efficiency.
What’s in bag:
1.FC-6S Fiber Optic Cleaver
2.Optical Power Meter
3.1mW Visual Fault Finder
4.Fiber Optic Stripper
5.Flat Drop Optic Cable Stripper
6.Cutting Guider Way
This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers.
It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
Singlemode or Multimode Use
250um ~ 900um
Typical Cleave Angle
9 - 16mm (Single Fiber - 0.25mm Coating)
10 - 16mm (Single Fiber - 0.9mm Coating)
Blade Life Time
36,000 cleaves (3,000 per blade position)
63 x 65 x 63mm
*High sensitivity, big dynamic range
*Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface
*Miniature chassis protection design, compact and easy, prevent accident drop damage instrument detectors.
*Rapid response, no preheating
*Low voltage function display
*The automatic shutdown function can be chosen
*Automatically shut off the backlight function can be chosen
*New user auto-calibration function
*Logarithm power (dBm) and linear power (xW) measurement
*Larger screen and LED backlit
800nm to 1700nm
Measurement Range (dBm)
Linear 0.1% or Non-linear 0.01dBm
SC, FC, Universal 2.5mm adaptor
3pcs AAA batteries (not included)
Battery Operating Time
240 h with 1.5V Battery(3)
_ 10 ~ +50
_ 20 ~ +70
>120 hours ( without backlight)
90% (+30oC )