The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, which is filled with the filling compound to protect it from water ingress. The cable is completed with a PE sheath.
*Good mechanical and temperature performance
*High strength loose tube that is hydrolysis resistant
*Special tube filling compound ensure a critical protection of fiber
*Specially designed compact structure is good at preventing loose tubes from shrinking
*Crush resistance and flexibility
*PE sheath protects cable from ultraviolet radiation
*The following measures are taken to ensure the cable watertight:
*Steel wire used as the central strength member
*Loose tube filling compound
*100% cable core filling
*PSP enhancing moisture-proof
Outer diameter (mm)
Crash loading (N/100mm)
Max attenuation: 0.35dB @ 1310nm and 0.21dB/Km @1550nm
Installation: Aerial or duct
Application: Apply to Long distance communication system, Local area network system
Lifetime: above 30 years
Operating temperature : -40°C~+70°C
Permission bent radius (Static: 10 times O.D. ) (Dynamic:20 times O.D.)
Fiber Color Code:
Q1:Can I buy it less than the MOQ?
A1:sure,any quantity is up to you
Q2. What is your terms of payment?
A2: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of quote ?
A3: EXW, FOB, CFR, CIF, etc .
Q4. How about your delivery time?
A4: Depends on the quantity , usually 15-20 days .
Q5. Can we get samples before place an order to test quality ?
A5: Yes , we would love to supply the sample .